普通砂型铸造中球铁件冒口的CAD

根据球铁件凝固原理，对常用湿砂铸型中制造球铁件，用计算机完成控制压力冒口的设计，流程框图适于各工厂和车间之用。     

在役加氢反应器试验板脆化和氢损伤的测定与研究

充分利用了带主焊缝的役后试板，在国内首次开展回火脆化、氢介质下断裂韧性与疲劳扩展的研究，结果表明，加氢反应器焊缝有明显的脆化表现。同时，核查了反应器开停车升温速度和降温速度规定，以及确定了裂纹允许尺寸的参考数据，为今后安全运行提供了充分的依据。     

Acidity near eroding polylactide-polyglycolide in vitro and in vivo in rabbit tibial bone chambers

Eroding poly(DL-lactide-co-glycolide)(PDLLG) washers were observed chronically in vitro and in vivo following loading in a bone chamber tibial implant (BCI). Images were recorded using intravital microscopy of the implanted rabbit and direct pH measurements were obtained of the tissue in the bone chamber using a combination probe-reference microelectrode. While statistically significant pH differences were found between the control (unloaded) and experimental (PDLLG-bearing) BCIs, they were only of the order of 0.2 pH units. This value proved to be physiologically insignificant as no statistically significant difference in bone defect healing, as indicated by angiogenesis, was detected. It was shown that the measured small pH changes during PDLLG washers erosion would result whether the buffer was phosphate-buffered saline replaced weekly or interstitial fluid subject to vascular exchanges.     

血管数字减影图象中的结构特征提取

基于Ｘ线数字减影图象的三维血管结构重建很大程度上依赖于图象中血管的有效检测和结构关系描述。本文给出一个在局部特征检测基础上的结构特征提取和组织方法，涉及结构分析之前的中间视觉处理层次，即将图象中主要结构分离出来供结构分析之用。首先用一个突出结构检测算法独立地组织和选择中轴曲线片断和边缘曲线片断，然后将两者信号相结合以验证突出结构算法获得的结果并滤除噪声结构。     

分子结构对增塑聚氯乙烯性能的影响

研究了聚合度、分子量分布和支化结构对增塑聚氯乙烯加工流变性能和物理力学性能的影响。结果表明，增塑ＰＶＣ的加工流变性能随聚合度的增加而恶化；拓宽分子量分布和引入支化结构均有利于加工流变性能的提高；增塑ＰＶＣ的拉伸强度随聚合度的增加而提高，而压缩永久变形却随之减小；分子量分布对物理力学性能的影响不大；支化ＰＶＣ的拉伸强度略有下降。     

全局最小均方算法

本文提出了一种基于全局均方误差最小准则的全局最小均方（ＴＬＭＳ）算法，在理论上分析了它的统计特性和收敛性，用数字仿真技术优良地它的性能。     

Performance evaluation of TCP/RLP protocol stack over CDMA wireless link

Due to the high frame error rate in wireless communication channels, an additional link layer protocol, Radio Link Protocol (RLP), has been introduced in the newly approvedData Services Option Standard for Wideband Spread Spectrum Digital Cellular System. In this paper, we investigate performance issues of a typical Cod Division Multiple Access (CDMA) wireless link using the protocol stack given in the standard. In particular, we focus on the dynamics of the TCP and RLP layers of the protocol stack since the fluctuation of system performance is largely caused by Automatic Repeat Request (ARQ) mechanisms implemented at these two layers. We compare the network performance of default parameter setting to those of other possible parameter settings. Analytical and simulation results presented in this paper can provide guidance to those attempting to further improve performance of interest.     

一种改进的4.8kb／s码激励线性预测语音编码

本文介绍了码激励线性预测（ＣＥＬＰ）语音编码的基本原理，研究了一种制约随机激励的线性预测编码方案。它将随机激励码字进入合成滤波器的数量与自适应码本的性能指标联系起来，有效地减少了激励噪声对合成语音的影响。计算机模拟结果表明，这种方法在主观上改善了语音质量。     

Experimental and theoretical studies on a distributed temperaturesensor based on Brillouin scattering

Results are reported from recent research on the use of the Brillouin gain/loss mechanism for distributed sensing. A theoretical model of the interaction of the pulsed and CW beams is described and compared with experiments. Results from a system with a 51 km sensing length are presented. We finally investigate issues related to the variation within the sensing fiber of the polarizations of the two beams     

超声波对化学镀Ni－Cr－P非晶态薄膜的金刚石性能的影响

研究了超声波对化学镀Ｎｉ－Ｃｒ－Ｐ非晶态薄膜的金刚石性能的影响。结果表明，超声波可使金刚石表面非晶态薄膜更加均匀和致密，从而提高了抗压强度，氧化温度和晶化后的强度。随超声波频率的增加，金刚石性能有增加的趋势。